|
Ashdown Electric Blue 15-180 Bass Combo Amp
List Price: $479.99
Our Price: $379.95
Ashdown Electric Blue bass amplification loads legendary Ashdown tone into an affordable new amp head and a pair of high-performance, high-value combos.
The EB 15-180 1 x 15" combo uses a 180 Watts RMS fan-cooled fast-transient power stage, and a fully-featured bass preamplifier with inputs for both active and passive instruments, an illumunated VU meter, 5 band EQ with Bright and Deep switches, a front panel-mounted balanced DI output for connection to a PA or recording console, an FX loop, a tuner/line output and the classic Ashdown sub-harmonic generator.
A high-performance Ashdown BlueLine bass driver ensures exceptional attack, clarity and low-end performance, while an extension speaker output can be used to connect an additional cabinet for use in larger venues. The cabinet is finished in a tough, scuff-proof carpet covering with protective corners and a kick-proof metal grille.
Ashdown Electric Blue 15-180 Bass Combo Amp Specifications:
- Power Output: 180 watts RMS
- High Input: Impedance 3.9mOhm/Input range 150mV-20V p-p
- Low Input: Impedance 10kOhm/Input range 300mV-40V p-p
- Line Input: Impedance 22kOhm/Input level 0dBu nominal
- Effects Return: Impedance 22kOhm/Level 0dBu nominal
- Tuner Output: Impedance 22kOhm/Level 0dBu nominal
- Effects Send: Impedance 22kOhm/Level 0dBu nominal
- DI Output: 600 ohm balanced/Level -20dBu nominal
- Speaker Outputs: Minimum impedance 4 ohms
- Bass: ±15dB @ 100Hz
- Lo: ±15dB @ 220Hz
- Middle: ±15dB @ 660Hz
- Hi Mid: ±15dB @ 1.6kHz
- Treble: ±15dB @ 7kHz shelving
- Deep: +8dB @ 50Hz
- Bright: +10dB @ 10kHz
- Signal to Noise: Better than 80dB (EQ flat)
- Distortion: Less than 0.5% THD
- Frequency Response: -3dB at 33Hz and 25kHz
- Power Requirements: 230/15v
- 19-1/10"W x 27-1/4"H x 26-1/5"D
- 55 lbs.
|
/
